Nov 10, 2026 · 1 hr 7 min · 13 segments
Fritz welcomes Clotilde Aschero, an agricultural engineer and consulting oenologist at Terra Mea and Laboratoires Dubernet in France, for a conversation about soil organic matter, microorganisms, and…
Fritz WestoverHost
And just a reminder, if you have a question about something in your vineyard you'd like me to answer on an upcoming podcast episode, just go to vineyardundergroundpodcast.com and click that Ask Fritz button and send me your question.

Our question for today's episode comes from Eric and Helene in Utah, and they wrote, we have a question regarding fertigation.

And of course, fertigation is applying fertilizer through your irrigation system.

And they say, for adding nutrients with fertigation, does the dilution rate matter as long as the proper nutrient amount per acre is put through the drip system? This is a great question.

I get this a lot and I do help a lot of growers with determining fertilization and their sites.

And I think the first thing to determine is the rate of the product that you want to apply for an acre.

So let's oversimplify this and presume that you have a one acre block and it is on its own irrigation segment or set and you can isolate it and irrigate just that one acre.

If the product you're reading the label on, because the label's the law, if the product recommends one to three gallons per acre, and you would like to apply three gallons per acre, you could literally put that product that's already liquid into your injector system container, whatever that might be, and you can inject those three gallons out into that one acre, and that will be three gallons per acre.

If you're trying to target a certain amount in pounds of nitrogen per acre, There's equations available for that that you can use to determine what your fertilizer weight is and what percent of, let's say, nitrogen it is, and you can determine the rate you'll put out for that acre.

Your question today is when you're adding the already known amount, does it matter the dilution rate? So here's the thing.

The most important thing, it's not the dilution, it's more important the amount of time of the injection.

You don't want the injection of that fertilizer to go too fast or too slow.

And the idea is if it goes out too quickly, like in five minutes or 10 minutes, it might only get out to the first few emitters in your vineyard site and the majority of the fertilizer will be getting to those vines in the beginning of the row and less of it to the vines in the end of the row.

So if you normally irrigate your vineyard for a six-hour set, this is a good, easy number to use.

It will pressurize your lines and make sure that your system is up and running.

You can check for leaks because you don't want any leaks when you're injecting any product through your irrigation system.

And just a reminder, if you have a question about something in your vineyard you'd like me to answer on an upcoming podcast episode, just go to vineyardundergroundpodcast.com and click that Ask Fritz button and send me your question.

Our question for today's episode comes from Eric and Helene in Utah, and they wrote, we have a question regarding fertigation.

And of course, fertigation is applying fertilizer through your irrigation system.

And they say, for adding nutrients with fertigation, does the dilution rate matter as long as the proper nutrient amount per acre is put through the drip system? This is a great question.

I get this a lot and I do help a lot of growers with determining fertilization and their sites.

And I think the first thing to determine is the rate of the product that you want to apply for an acre.

So let's oversimplify this and presume that you have a one acre block and it is on its own irrigation segment or set and you can isolate it and irrigate just that one acre.

If the product you're reading the label on, because the label's the law, if the product recommends one to three gallons per acre, and you would like to apply three gallons per acre, you could literally put that product that's already liquid into your injector system container, whatever that might be, and you can inject those three gallons out into that one acre, and that will be three gallons per acre.

If you're trying to target a certain amount in pounds of nitrogen per acre, There's equations available for that that you can use to determine what your fertilizer weight is and what percent of, let's say, nitrogen it is, and you can determine the rate you'll put out for that acre.

Your question today is when you're adding the already known amount, does it matter the dilution rate? So here's the thing.

The most important thing, it's not the dilution, it's more important the amount of time of the injection.

You don't want the injection of that fertilizer to go too fast or too slow.

And the idea is if it goes out too quickly, like in five minutes or 10 minutes, it might only get out to the first few emitters in your vineyard site and the majority of the fertilizer will be getting to those vines in the beginning of the row and less of it to the vines in the end of the row.

So if you normally irrigate your vineyard for a six-hour set, this is a good, easy number to use.

It will pressurize your lines and make sure that your system is up and running.

You can check for leaks because you don't want any leaks when you're injecting any product through your irrigation system.
The rest of this transcript — segmented and speaker-labeled, so you land on the exact moment something was said
Search every transcript — by keyword, by phrase, or by meaning, across every show Radar indexes
Trends — what is surging across podcasts, measured against its own baseline
Alerts — when a name you follow appears in a newly indexed episode
No account is needed to search Radar.