Fincantieri S.p.A.
FINCANTIERI AOR ORDwww.fincantieri.com
14
MENTIONS
8
EPISODES
8
PODCASTS
Search complete. 14 mentions across 8 episodes found for "Fincantieri S.p.A.".
Nov 20, 2026
CAVASSHIPS Podcast [Nov 20, ’26] Ep: 268 USNI News Team on Busy Week of Navy Headlines
M
41:30Mallory ShelbourneGUEST
So There's a lot of compatibility there, according to them.
M
41:36Mallory ShelbourneGUEST
Sam had talked to the CEO of Fincantieri Marinette Marine about a month or two ago, and we caught up with the Italians in Europe, too.
M
41:46Mallory ShelbourneGUEST
And, you know, there's openness there to pitch, you know, the Frem Evo product.
M
41:53Mallory ShelbourneGUEST
And then obviously we talked to Babcock about the Arrowhead they also want in the mix and there was an op-ed yesterday from a UK official saying that you know they could build the UK could build the next frigate in the US for the Navy for the US Navy so.
Carnival's HUGE Reveal! New Cruise Ships, Celebration Key Expansion & Norwegian Changes
N
12:29NestorCORRESPONDENT
The company has ordered two ships of approximately 130,000 gross tons each, scheduled for delivery in 2033 and 2035.
N
12:38NestorCORRESPONDENT
They'll be powered by liquefied natural gas and constructed by Italian shipbuilder Fincantieri.
N
12:43NestorCORRESPONDENT
Carnival says the smaller design will allow these ships to visit more ports, expanding the number of destinations available to passengers.
N
12:51NestorCORRESPONDENT
And that's something I think many experienced cruisers will appreciate.
Arsenal of Allies
J
11:02Joshua TallisGUEST
The first and kind of the lowest hanging fruit, something we hear a lot about, which is greater foreign investment in or operation of US shipbuilding yards.
J
11:11Joshua TallisGUEST
So that would be You know, there's a lot of news about Hanwha having bought the Philly shipyard from Cantieri, which operates a number of yards, including in Marinette on the coast of Wisconsin.
J
11:23Joshua TallisGUEST
Austal, which is an Australian company, and it's purchased an operation of the Austal yard in Alabama, if I'm remembering correctly.
J
11:33Joshua TallisGUEST
Yeah.
Engineering After Disaster: The Massive Genoa Bridge Rebuild | FD Engineering
S
38:58speaker_0NARRATOR
The other key material in building the bridge is the steel.
S
39:02speaker_0NARRATOR
This is put together off-site in the Fincantieri construction sites dotted across Italy.
S
39:21speaker_0NARRATOR
As construction continued after freeing up the valley of rubble from the bridge, victims' families and evacuees protested.
S
39:30speaker_0NARRATOR
The tragedy was not forgotten.
6 MINS LATER
M
45:56Marco BucciSOUNDBITE_SPEAKER
So, obviously, during the construction, any defects were investigated.
S
46:01speaker_14SOUNDBITE_SPEAKER
The design choice
S
46:11speaker_12SOUNDBITE_SPEAKER
The design choice of using steel and concrete and contracting out the steel parts in order to be able to draw on all the Fincantieri workshops around Italy allowed us to prefabricate all these macro elements of the bridge in these workshops at the same time.
S
46:27speaker_12SOUNDBITE_SPEAKER
Then, over time, these elements were shipped to the Genoa port and, using special transports, they were brought to the construction site where, one by one, we allocated special assembly areas on site where the elements could be finished while the pier was still being built.
President Trump & Israeli PM Hold Phone Call Saturday AM; Discuss Resumption of Strikes on Iran + Iran's Supreme Leader Promises "Unrestricted Response" + Oleshky Ceasefire Between Russia & Ukraine Successful End; 0 Violations from Either Side
S
18:46speaker_1HOST
Gulf Coast Bollinger Shipyard is already on contract to build the first LSM.
S
18:51speaker_1HOST
And there's a Fincantieri Marinette Marine out of Wisconsin, won a contract earlier in the year for long lead items for the four ships.
S
19:00speaker_1HOST
The contract that Tote has is for as many as eight ships, according to the company.
S
19:06speaker_1HOST
The LSM is based on the Domin LST-100 concept, an export-oriented tank landing ship designed currently in service with the Nigerian Navy and planned for the Royal Australian Navy.
Foreign press review - October 19, 2026
S
2:11speaker_0HOST
The news was reported by borneapolitin.com.bn on October 14.
S
2:16speaker_0HOST
The Italian Navy vessel Giovanni delle Bande Nere has made a port call at Port Klang, Malaysia, while negotiations are underway between Kuala Lumpur and Fincantieri over the acquisition of several corvettes for the Malaysian Navy.
S
2:30speaker_0HOST
The initiative highlights Italy's interest in expanding its presence in the Asian defense market and strengthening relations between the two countries.
S
2:37speaker_0HOST
The news was reported by Airtimes.my on October 13.
IRAN SEABORNE OIL REVENUE TO HIT ZERO NEXT MONTH, IRGC BOMB SHIPS DAILY – w/ Sal Mercogliano
B
25:53Brandon WeichertHOST
Constellation, which was a disaster.
S
25:55Sal MercoglianoGUEST
Right, because it was being built up in Fincantieri up in Wisconsin.
S
25:59Sal MercoglianoGUEST
It was based on the French and Italian Frem, which is beautiful frigate, beautiful.
S
26:03Sal MercoglianoGUEST
But what was supposed to be a modification of 15% of the design turned into a modification of 85% of the design, and the ships were heavily overloaded, and it just wound up into a disaster, which makes me worry that if we buy a Megami class from Japan or an Ulsan – from Korea, we won't do the same thing again.
5 MINS LATER
S
31:28Sal MercoglianoGUEST
No, I think we're going to see that.
S
31:30Sal MercoglianoGUEST
I think that ceramic yard down in Brownsville will do it.
S
31:32Sal MercoglianoGUEST
Ironically, the Fincantieri yard up in Wisconsin, which was going to build those constellations, had just brought over a technology that allowed them to automatically cut steel at a much faster rate.
S
31:42Sal MercoglianoGUEST
Matter of fact, they got that from their shipyard in Italy that builds cruise ships.
Humanoid Robot CEO & VC: 100s Of Millions Of Robots Are Coming | Generative Bionics x CDP Venture
D
11:36Daniele PucciGUEST
Exactly.
D
11:37Daniele PucciGUEST
For instance, we can understand In hours, what is the optimal material for the robot when it has to work in Fincantieri? What is the optimal weight distribution in that specific environment? And how to tune also the manufacturing process according to this material can be done automatically thanks to these generative physical line methods that we've been working on for years.
T
12:04Tom GuinnessHOST
Right, so speaking about building these robots and having CDP Ventures support, compared to building tens of these, what's going to be the hardest thing about going from building ten to building thousands?
D
12:17Daniele PucciGUEST
The scalability of these platforms is indeed something that we are looking at closely.
D
14:43Daniele PucciGUEST
Manufacturing is something complex because you need to manufacture things.
D
14:50Daniele PucciGUEST
Manipulation is something that you have to deal with.
D
14:53Daniele PucciGUEST
That's why we decided to engage in a collaboration with Fincantieri.
D
14:57Daniele PucciGUEST
Fincantieri is one of the largest shipbuilders in the world.