Extron Electronics

So I'm not really sure.

I would love to have anybody else's thoughts on this one, but you might look into getting something like an Extron HDMI switch used that also has serial control, but then you would need to program something in yourself and connect to the Tink 4K's USB port for serial control there, and then just hope that the SVS and HDMI switch don't talk at the same time, or one talks after the other in the wrong order.

Will the recently added Tink 4K Pro feature of upmixing digital audio to a certain kilohertz value be helpful for making their 5.1 amp play nice with their modded SNES's digital audio signal? Yes, it should.

And if that's the case, you could do something like on the HDMI output of your RetroTINK, get that HDMI splitter that I've been talking about for years and put its output, output two into your receiver and output one into the HDMI to VGA converter.

All you would really need is an HDMI to VGA converter, like that $10 one I always talk about.

And then you could just use the GameCube's analog port for audio, even with composite video cables.

And then you mentioned you have an RGBHV to RGSB converter, probably like an Extron RGB interface.

So that would do that totally fine, the only issue would be you have to go into your GC video settings and disable line doubling, and then just don't enable 480p mode for any of your games or Swiss.

This is the control processor in the touch panel.

Crestron, Extron, Q-SYS, AMX, depending upon how old the building is.

This is the box that says the room is in presentation mode or the room is off.

For our purposes, this is the most important piece because it's the one that knows the room's state.

This is the control processor in the touch panel.

Crestron, Extron, Q-SYS, AMX, depending upon how old the building is.

This is the box that says the room is in presentation mode or the room is off.

For our purposes, this is the most important piece because it's the one that knows the room's state.

But you, you don't have a tag or a flag installed on this date, and, and it should be technically due on this date.

I, I, I can't tell them what the end of life is because they can still walk in and hit the Extron power on button and-

The touch here is dead

...

What we're gonna do here is, uh...

What, what are you? Oh, look at that, and Troy, Extron.

Okay, Troy, you're on.

How come you're...

You need to get over here and get on the show.

Uh, we haven't had, uh, we haven't had you on yet, so, uh, get, get down over here.

Um, but of course, the Extron booth is just pumping.

Um, and so I can understand why, uh, the...

I mean, that's what's in its construction kind of related items.

But it's additional LV mud rings, one gang, two gang, or the modular ones that Extron makes.

That sort of stuff's what's in there.

I think we had a point of contention on an earlier discussion.