Skip to main content
Blaser Jagdwaffen

Blaser Jagdwaffen

Blaser Jagdwaffen is a German manufacturer of hunting firearms, based in Isny im Allgäu, that has designed and produced rifles for over 60 years. The company also offers hunting optics, ammunition, silencers, and related hunting equipment and clothing.www.blaser.de

Search complete. 11 mentions across 5 episodes found for "Blaser Jagdwaffen".

Sep 21, 2026

Mike SchobyGUEST
19:41
And you're like, wow.
Mike SchobyGUEST
19:43
And that requires a totally different type of gun, right? I mean, they shoot almost exclusively Blaser straight bulls because they're fast, you know.
Mike SchobyGUEST
19:49
i don't think they'd ever use some autos even if they could legally most of them that can't but they just like that riflemanship and being able to work a bolt quick and get back on a target they shoot no powered optics they always shoot aim points even if they don't work frame point they're shooting aim points because you can keep both eyes open and watch that moving target and make sure a dog isn't coming into that shot as you're breaking it so it's a totally different set of parameters than what you focused on or you know i luckily i've seen a little bit of all of this you know i gotta be a jack of all trades and good at none of it you know
Aaron DavidsonHOST
20:18
what uh what hunt or or experience is kind of that one that brings you back again or that you would like to go do again

19 MINS LATER

Mike SchobyGUEST
39:22
Oh, that's 100% right.
Mike SchobyGUEST
39:23
I've always had that, I don't want to say argument, but debate with guys because I've gotten spoiled in my life where I appreciate fine things, whether it's watches or cars or guns.
Mike SchobyGUEST
39:32
People will look at your rifle or a Rigby that I own or a Blaser that I own and like, man, why does that cost $5,000 or $10,000 or $15,000? I'm like, my Savage will shoot a half minute.
Mike SchobyGUEST
39:43
Yeah, it will.
Rob GearingGUEST
29:39
Um, I've done other hunts with a Weatherby, um, that performed very, very well again.
Rob GearingGUEST
29:46
Um, and then the first hunt I did, I took a Blaser out.
Rob GearingGUEST
29:50
Um, I didn't end up using the Blaser, um, not because there was a problem with the Blaser, because it was too light a caliber.
John McAdamsHOST
29:58
Mm-hmm.
Rob GearingGUEST
29:59
Um, so I used a friend's rifle instead, which was much more punchy.
Rob GearingGUEST
30:03
But that's part of the learning curve.
Rob GearingGUEST
30:05
You know, I went out and I thought, "I can do anything with this little Blaser.
Rob GearingGUEST
30:08
This'll be great." Um, but it just wasn't...
Randall WilliamsGUEST
48:19
Yeah.
Randall WilliamsGUEST
48:19
So I definitely, I definitely see the appeal now, you know, and while I was over there, I hunted both the Roebuck and the Shamwai shot with Blaser K95s, which is a, you know, a single shot break action shotgun.
Randall WilliamsGUEST
48:36
and never, never hunted with the break action centerfire rifle before.
Ron BoehmeHOST
48:42
I don't think I've ever seen that version.
Randall WilliamsGUEST
49:23
Because it's just four posts holding up a roof.
Randall WilliamsGUEST
49:26
So that short little gun was real handy for that.
Randall WilliamsGUEST
49:28
And the other thing that I really hadn't appreciated about those guns is When you close, and this might just be specific to the Blaser, but when you close that break action, I'm used to closing like it cocks on close, right? Right.
Randall WilliamsGUEST
49:48
So on those guns, it doesn't cock on close.
MarkyHOST
57:55
And, you know, they're expensive high dollar guns and you know how the Russians are, you get some of the, you know, some of those wealthy Russians, they spend some money on some guns.
MarkyHOST
58:05
So in Russia, there were a bunch of these small, companies, boutique companies that were making custom stocks and custom barrel shanks and custom magazines and parts for Blaser rifles.
MarkyHOST
58:22
And I'd been regularly communicating with a couple of these groups, talking about the possibility of Hey, you know, I'm a Blaser guy bringing the stuff into the U.S.
MarkyHOST
58:34
This all hit and boom.
MarkyHOST
58:36
And it was like, no, we can't do it.
Kenny DavisGUEST
5:48
That's going to be an interesting deal.
Kenny DavisGUEST
5:50
We're going to do a Blaser chassis.
Kenny DavisGUEST
5:52
As soon as that one's done, we'll get on the Blazer also.
Kenny DavisGUEST
5:55
But we've still got a bunch being built with Roadster Shops in the shop now.

We value your privacy

We use cookies to understand how you use our platform and to improve your experience. Click “Accept All” to consent, or “Decline non-essential” to opt out of non-essential cookies. Read our Privacy Policy.